Table of Contents
Advertisement
Warm
and
cold
and ventilate the vehicle at the first sign of
unwellness.
— Even though fresh air is supplied automati-
cally, using recirculation mode for long peri-
ods of time can result in an increased con-
centration of COz in the vehicle interior. This
could impair concentration and affect well-
being, which can increase the risk of an acci-
dent. Switch recirculation mode off at the
first sign of unwellness.
— Applies to: vehicles with seat heating: Indi-
viduals with reduced sensitivity to pain or
temperature could develop burns when us-
ing the seat heating function. To reduce the
risk of injury, these individuals should not
use seat heating.
@)
Note
Applies to: vehicles with heated seats
To reduce the risk of damage to the seat heat-
ing elements, do not kneel on the seats or
place heavy pressure on one area of the seat.
@
Tips
— Applies to: vehicles with heated seats: If the
front passenger's seat heating has been
turned on, it will not turn on again automat-
ically if more than 10 minutes have passed
between switching the ignition off and on
again.
— Applies to: vehicles with fragrance function:
Only use the fragrance function in modera-
tion and take any other passengers and ani-
mals into consideration when using the
function. An overlap of different scents or
odors could cause discomfort. If there is dis-
comfort, reduce the intensity or switch the
fragrance function off. Only use fragrances
that are approved by Audi.
Adjusting the vents
You can open and close the vents using the
thumbwheels. The levers adjust the direction of
the airflow from the vents.
92
Additional settings
You can adjust additional settings.
>» Applies to: MMI: Select on the home screen:
VEHICLE > Air conditioning > ©.
Fragrance
Applies to: vehicles with fragrance function
Using Fragrance selection, you can select the fra-
grance and see the fill level of the fragrance.
You can select the strength of the scent with Fra-
grance level.
Footwell temperature
Applies to: vehicles with footwell heating
You can adjust the footwell temperature for the
driver and front passenger.
rN
Iams
Applies to: vehicles with air quality display
Ce aT
EE)
a
You can display information about the air quality.
Fig. 74 Upper display: air quality indicator
> Applies to: MMI: Select on the home screen:
VEHICLE > Air conditioning > Air quality.
Active combination filter
Applies to: vehicles without particulate matter sensor
A schematic display represents the effectiveness
of the filter. The display visualizes the amount of
pollutant particles in the vehicle interior in com-
parison to the surroundings.
Particulate matter sensor
Applies to: vehicles with particulate matter sensor
A sensor detects the particulate matter concen-
tration (PM2.5) outside and inside the vehicle.
The detected values are displayed as the air qual-
ity index (AQI) on a colored scale (@). A value in
the green range indicates very good air quality.
>
Advertisement
Table of Contents
