Audi AZ 2022 Owner's Manual page 88

Storage and convenience
Luggage compartment cover Folding the outer backrests
Applies to: vehicles with folding backrests
Fig. 66 Luggage compartment: luggage compartment lid
cover
Fig. 67 Luggage compartment: cover behind the rear
bench seat
Observe the safety precautions > page 84.
Removing and installing the luggage
compartment lid cover
> To remove the luggage compartment lid cover
@, turn the knob to a horizontal position.
> Pull the cover out of the retainers in the direc-
tion of the arrow.
> To install the cover, slide it forward on the re-
tainers until they engage.
> Turn the knob to a vertical position.
Removing and installing the cover behind
the rear bench seat
> To remove the cover behind the rear bench seat
@), pull the cover in the direction of the arrow.
> Pull the cover upward to release.
> To install the cover, insert the left and right
sides of the cover into the mounts on the side
trim panel.
> Slide the cover forward until it locks into place.
86
Fig. 68 Outer backrest: release lever and latching indicator
with red marking
The rear seat backrests can be folded forward ei-
ther separately or together.
Observe the safety precautions > page 84.
> Pull the release lever (7) in the direction of the
arrow to fold the backrest forward.
> After the transport, fold the backrest up again
until it latches and the red marking @) is no
longer visible.
Folding the center armrest
Applies to: vehicles with folding center armrest
Fig. 69 Center backrest: release lever
Observe the safety precautions > page 84.
> To fold the center backrest forward, pull the
lever @ in the backrest opening.
>» After the transport, fold the center backrest up
until it locks into place.