Table of Contents
Advertisement
Instrument
cluster
Operating
Fig. 3 Instrument cluster: driver information system
The following tabs may be available, depending
on vehicle equipment:
Fig. 4 Left side of multifunction steering wheel
Information is organized within various tabs (@) in
the instrument cluster. The tab contents are dis-
played in the central area @).
Requirement: the ignition must be switched on.
Selecting a tab
> Press the </> button @) repeatedly until the
desired tab is selected.
Returning to functions at higher levels
> Press the 5 button ©).
Opening and closing the menu
> Press the [=] button ©).
Selecting and confirming a function
Requirement: a menu or list must be displayed.
> To select a function, turn the left thumbwheel
@ to the desired function.
> To confirm a selection, press the left thumb-
wheel (2).
Switching the view
> Press the VIEW button (@).
14
First tab
Vehicle functions > page 18
Second tab | Driver messages (this is only dis-
played if at least one indicator
light/message is being displayed)
Third tab
Night vision assist (this is only dis-
played if the night vision assist
has been activated) > page 152
Fourth tab | Radio > page 233
Media > page 244
Fifth tab
Telephone > page 205
Sixth tab
Navigation > page 227
Adjusting the display
Fig. 5 Upper display: adjusting the display
Switching the view
>» Press the VIEW button to switch between the
default view (@) and the enhanced view (2).
Adjusting the layout
Depending on the vehicle equipment, various lay-
outs may be available.
» Applies to: MMI: Select on the home screen:
SETTINGS > Display & brightness > Audi virtu-
al cockpit.
> To adjust the desired layout, press @).
Setting the automatic layout change
Applies to: RS models
Requirement: depending on vehicle equipment,
the RS Performance or RS Runway layout must
be set.
>» Applies to: MMI: Select on the home screen:
SETTINGS > Display & brightness > Audi virtu-
al cockpit > Configure > Automatic activation
of RS layout.
Advertisement
Table of Contents
