Page 1
VESA adapter Assembly instructions The VESA adapter is compatible with monitors from the Samsung (samsung.com) OLED G9 series and other models: S49CG954SU With the VESA adapter, you can easily attach your SAMSUNG monitor to a monitor arm with a VESA hole pattern (75 x 75mm). Use the supplied screws and nuts for this.
Assembly instructions Important Safeguards Please read these instructions carefully and keep them for future reference. If you pass the product on to third parties, these instructions should always be included. Failure to follow these instructions may result in injury or damage to persons or the product, for which we cannot accept any liability.
For the disposal of this product we recommend to contact the responsible local authorities or disposal services. They can provide you with detailed information on available disposal options and recycling centers in your area. 4. Manufacturer Information 3idee Technologies S.à r.l. 5 Um Lenster Bierg L-6125 Junglinster Luxembourg 5.
Assembly instructions Horizontal / Vertical Alignment Please note: Not all VESA adapters and monitors are designed for vertical (upright) orientation. This limitation is often due to the specific geometry of the adapter or monitor. Do not ignore this information, as the load limit of the adapter can quickly be exceeded if not installed properly. We are continuously working on developing monitors and adapters that are also suitable for vertical orientation.
Samsung monitor. Now screw the 3idee VESA adapter to your Samsung monitor as shown using the 4 supplied M4 screws (screw bag: SP22) and the washers (screw bag: SP22)
Page 7
Assembly instructions Step 4 Please check that all 4 screws are properly tightened. (Figure Figure 3 Step 5 We recommend that you have a second person for this step. Now lift the monitor and hold it against your monitor mount. Fasten the VESA adapter with the 4 M4x14 screws supplied (screw bag: SP2).