Table of Contents
Advertisement
en Programme counter
15.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1.
Press Schleudern and, at the
2.
same time, turn the programme
selector to position 2.
The display shows the current
a
value.
Set the programme selector to the
3.
required position.
→ "Overview of the basic settings",
Page 33
To change the value, press Fertig
4.
in.
To save the changes, switch off
5.
the appliance.
16 Programme counter
The program counter displays the
number of finished programmes.
16.1 Calling up the pro-
gramme counter
Set the programme to position 1.
1.
Press Schleudern and set the pro-
2.
gramme to position 2 at the same
time.
Set the programme to position 5.
3.
34
17 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
17.1 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
Regularly run a programme for
▶
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
▶
every operation with the door
open, and leave the detergent
drawer to dry.
Run the Trommel Reinigen pro-
▶
gramme without laundry and with a
cleaning agent for caring for the in-
side of the appliance
→ "Accessories", Page 28 or with
washing powder that contains
bleach.
17.2 Cleaning the detergent
drawer
Pull out the detergent drawer.
1.
Advertisement
Table of Contents
