To Make A 4-Second Silent Interval - Technics RS-TR474 Operating Instructions Manual

Asilent interval of 4 seconds or mare can be provided between
tracks. This function is useful for playing back on decks which
can skip to the beginning of tracks, and for cutting unwanted
sound from commercials.
To make a 4-second silent interval
AUTOREC MUTE Press AUTO REC MUTE momen-
tarlly while a recording is being
made.
A4-second silent Interval will be recorded, and
the unit will automatically be set to the recor-
ding standby mode.
To make a silent interval more than
4 seconds
AUTOREC MUTE Press and hold AUTO REC MUTE
for the necessary number of
seconds while a recording Is being
made.
The unit will change to the recording stand-by
mode when the button is released.
To resume recording
> | Press either < or B, correspon-
Ty ding to the side of the tape side in-
So icator which Is lit.
I
{Arn A !
Ua va ii
\pagnerngeeeee aa
a ae
Pret ieet roe)
Tape side indicator
When new recordings are made on a pre-recorded tape, all
sounds recorded on that portion of the tape are automatically
erased. To erase a tape without making a new recording, follow
the steps below.
2 Prepai ration
Load the tape to be erased Into Deck 2.
"""potsvna Press DOLBY NR so that the
eh) Dolby NR indicators ("B"
and "C") are off.
(Refer to page 12.)
[9 "Reverse Press REVERSE MODE to
l select the desired reverse
mode.
=": To erase one side of the tape. ~~
GD, : To erase both sides of
the tape.
{Refer to page 12.)
Set the REC LEVEL control
to "0".
5 Press < or > to begin eras-
r T Ing the tape.
ee ~: To erase the forward side of the
tape.
<4: To erase the reverse side of the
tape.
To erase both sides of the tape, be
sure to press the > button.
(The unit will be In the recording stand:
: . .bymode,) . . . ee e e eee
15