Attaching The Controller With The - Holdet - Roland GK-3B Owner's Manual

Attaching the GK-3B to the Bass
E Attaching the Controller with the Holder
Refer to the following figures showing examples of ways to mount the controller, then select
the most suitable method for the bass at hand.
Installation Examples
Example 1) Mounting on the Front of the Bass Example 3) Mounting on the Back of the Bass
This method is recommended for basses If there is insufficient space to install the
with sufficient space on the bass's top 'to controller on the bass top, you can use this
mount the controller (p. 15). method to mount the controller to the back
of the bass (p. 17).
Example 2) Mounting Over the Bridge
If there is insufficient space to install the
controller on the bass top, you can use this
method to mount the controller over the
bridge (p. 16).
14