Attaching The Controller With The Holder - Roland GK-3B Owner's Manual

Attaching the GK-3B to the Bass

■ Attaching the Controller with the Holder

Refer to the following figures showing examples of ways to mount the controller, then select
the most suitable method for the bass at hand.
Installation Examples
Example 1) Mounting on the Front of the Bass
This method is recommended for basses
with sufficient space on the bass's top to
mount the controller (p. 15).
fig.1170
Example 2) Mounting Over the Bridge
If there is insufficient space to install the
controller on the bass top, you can use this
method to mount the controller over the
bridge (p. 16).
fig.1180
14
Example 3) Mounting on the Back of the Bass
If there is insufficient space to install the
controller on the bass top, you can use this
method to mount the controller to the back
of the bass (p. 17).
fig.1190