Vulcan-Hart 2T2036G Specifications

SPECIFICATIONS:
2
Two 24 quart / jacketed tilting steam kettles mounted on a
3
36" wide gas boiler base, Vulcan-Hart Model No. 2T2036G.
Steam jacketed kettle mounted on 28" high base cabinet with
stainless steel frame, front full height doors, slip-off stainless
steel side and aluminized rear panel with 6" adjustable legs
with flanged feet for anchoring. Fully welded hemispheric
bottom kettle with type 304 stainless steel jacket and type
316 stainless steel liner. Jacket tested to 50 psi (3.4 kg/cm
Steam control valve on right trunnion leg. 12" single tempera-
ture deck mounted faucet. 200,000 BTU/hr. gas steam boiler.
Requires 120 volt, 60 Hz, 1 phase control circuit, 3 amp.
Exterior dimensions:
Cabinet: 36"w x 33"d x 28"h on 6" adjustable legs. Overall
height to the lip of the kettle - 46", to the top of the
5
flue - 58 / ".
8
CSA design certified. Classified by U L to NSF Std. #4. Meets
ASME Code.
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028
F-32382 (10-03)
2 ).
502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602
Item # __________________________
MODEL 2T2036G
2
TWO 24 QUART / JACKETED TILTING
3
KETTLE ON GAS BOILER BASE
STANDARD FEATURES
Two 2 / jacketed tilting steam kettles, 24 quart capacity each.
3
Steam jacketed kettle mounted on 28" high base cabinet with
stainless steel frame, front full height doors, slip-off stainless
steel side and aluminized rear panel with 6" adjustable legs
with flanged feet for anchoring.
Fully welded hemispheric bottom kettle with type 304
stainless steel jacket and type 316 stainless steel liner. Jacket
tested to 50 psi (3.4 kg/cm
Steam control valve on right trunnion leg.
12" single temperature deck mounted faucet.
CSD-1 code compliant boiler.
Electronic ignition.
200,000 BTU/hr. gas steam boiler.
Requires a 120 volt, 60 Hz, 1 phase control circuit, 3 amp.
Water filter system, SPS620V. Includes second year extended
limited water associated parts and labor warranty.
One year limited parts and labor warranty.
OPTIONS
Correction package.
- Cabinet door with hasp (lock by others).
- Security type tamper resistant fasteners.
- Front flanged feet.
Stainless steel finishing back.
Stainless steel main frame.
12" dual temperature faucet.
240,000 BTU/hr. input boiler.
Tilting kettle strainer (one) (two).
Mount and interconnect kettle with boiler base at factory.
Includes steam supply piping. Shipped on one skid.
Second year extended limited parts and labor warranty.
ACCESSORIES
Stainless steel back panel.
Lift-off cover (one) (two).
Contour measuring strip.
Single perforated stainless steel basket (one) (two).
C.S.I. Section 11420
2 ).