Summary of Contents for Bensons for Beds HATTIE STK799806
Page 1
P.O.Number : Please Keep This Number For Future Reference THIS FORMS PARTS OF YOUR GUARANTEE! HATTIE BED 90 cm Assembly lnstructlons Please keep these lnstructlons for future reference. Minimum two person assembly 1 Hr Approximate Assembly Time Product Details STK799806 3' Bed Light Grey Regrettably self-assembly items cannot be returned once assembly is part or fully completed unless the items are found to be faulty.Should you need to return the un assembled product, please repack in its original packaging.
Page 2
Tips before you start! 1. Please check that all parts are present before you start the assembly of your furniture. 2. For ease and speed of assembly, we recommend that before you commence each step of the assembly, that you identify all the parts required for that step. 3.
Page 3
Components A Headboard x 1 B Footboard x 1 C Side Rail (Left) D Side Rail (Left) (3'-1010 x 840mm) (3'-970 x 150mm) Headboard end x 1 Footboard end x 1 (3'-965 x 150mm) (3'-965 x 150mm) Note: Note: Hook Bracket No Bracket E Side Rail (Right) F Side Rail (Right)
Page 4
Step 1 ALL parts and components are packed inside a zipped cover on the back of the Headboard. Shown upside down WARNING! The headboard is heavy. Lift with care. Step 2 ● Open out the legs on cross stretcher ● Ensure hinges are locked as shown and secured using fixings Locked Straighten the hinge to lock...
Page 5
Step 3 ● Assemble side rails using connecting plates and fixings Headboard end Headboard end Footboard Footboard Required Fixings for this step. N x 1 Q x 12 S x 12 Step 4 ● Attach footboard feet to footboard using fixings Required Fixings for this step.
Page 6
Step 5 ● Locate side rails into connecting plates ● Secure using fixings Required Fixings for this step. N x 1 R x 2 S x 2 Do not fully tighten fixings at this stage! Step 6 ● Assemble footboard to side rails using fixings Required Fixings for this step.
Page 7
Step 7 ● Screw headboard feet into headboard ● Screw fixings into the headboard but leave very lose. 10mm Leave screws lose Required Fixings for this step. M x 4 P x 4 S x 4 N x 1 Step 8 ●...
Page 8
Step 9 ● Open out the base slatted system and locate them into position. They are secured by the velcro strips. ● Gently lay the slats onto the centre support and side rails. Evenly space out the slats by gently pulling and press the velcro strips together to hold them in place. (REV 03 12/12/2023) Page 8 of 8...
Need help?
Do you have a question about the HATTIE STK799806 and is the answer not in the manual?
Questions and answers