Manufacturer's Warranty; Further Information - Hilti NURON PC 2-22 Manual

Hide thumbs Also See for NURON PC 2-22:
Table of Contents

Advertisement

Available languages

Available languages

Trouble or fault
Pulsating pressure
Pressure steadily too low
(note: certain accessories can
reduce the pressure)
Motor is running but pressure
is limited or no working pres-
sure
10
Disposal
WARNING
Risk of injury due to incorrect disposal! Health hazards due to escaping gases or liquids.
▶ DO NOT send batteries through the mail!
▶ Cover the terminals with a non-conductive material (such as electrical tape) to prevent short circuiting.
▶ Dispose of your battery out of the reach of children.
▶ Dispose of the battery at your Hilti Store, or consult your local governmental garbage disposal or public
health and safety resources for disposal instructions.
Most of the materials from which Hilti products are manufactured can be recycled. The materials must be
correctly separated before they can be recycled. In many countries, your old tools, machines or appliances
can be returned to Hilti for recycling. Ask Hilti Service or your Hilti sales representative for further information.
▶ Do not dispose of power tools, electronic equipment or batteries as household waste!
11

Manufacturer's warranty

▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
12

Further information

For more information on operation,
qr.hilti.com/manual/?id=2404923
This link is also to be found at the end of the operating instructions, in the form of a QR code.
Mode d'emploi original
1
Indications relatives au mode d'emploi
1.1
À propos de ce mode d'emploi
Avertissement ! Il convient de lire et comprendre toute la documentation jointe, y compris, sans
s'y limiter, les instructions, avertissements de sécurité, illustration et spécifications fournies avec le
présent produit. Prenez connaissance de toutes les instructions, avertissements de sécurité, illustrations,
spécifications et fonctions du produit avant de l'utiliser. Tout manquement à cette obligation peut
12
Français
Possible cause
Water supply not correct
Water filter or intake filter clogged
Intake hose kinked or pinched
Spray nozzle worn out
Water not connected
Water filter or intake filter clogged
Spray nozzle clogged
technology,
environment and recycling,
Action to be taken
▶ Check that the water connection
corresponds to the information
stated in the technical data and
is supplying sufficient water.
The smallest-diameter hoses
that it is permissible to use are
¹/₂" or ⌀ 13 mm.
▶ Clean water filter and/or intake
filter.
▶ Straighten out the intake hose.
▶ Replace the spray nozzle.
▶ Connect the water.
▶ Clean water filter and/or intake
filter.
▶ Clean the spray nozzle.
follow this link:
2404923
*2404923*

Advertisement

Table of Contents
loading

Table of Contents