2. Layout and items supplied Danger! When using the equipment, a few safety pre- cautions must be observed to avoid injuries and 2.1 Layout (Fig. 1/3) damage. Please read the complete operating 1. Spindle lock instructions and safety regulations with due care. 2.
• 3. Proper use Catapulting of parts of the material being pro- cessed (injuries through cutting or bruising) • Risk of fire from flying sparks The machine is designed for polishing coated • Damage to hearing if the compulsory hearing surfaces and for sanding wood, iron, plastic and protection is not used (hearing loss) similar materials using the appropriate abrasive...
Operating mode: Sanding with sanding paper Do not use the machine at temperatures of Vibration emission value a = 5,194 m/s t=10°C or lower. Think out a work plan which ena- h,DS K uncertainty = 1.5 m/s bles you to limit your exposure to vibrations. Operating mode: Polishing A certain level of noise nuisance is inevitable with Vibration emission value a...
If the battery pack still fails to charge, send Switching the equipment ON/OFF • the charging unit The equipment is turned on (I) and off (0) with • and the battery pack the ON/OFF switch (Fig. 3 / Item 3). However, the to our customer service center.
• Excessive pressure results in poor perfor- from top to bottom. • mance and early wearing of the accessory Remove all insects, bird droppings and tar used. Sensitive surfaces may be damaged stains from the paintwork daily. • e.g. due to excessive speed or too high a If you use any window-cleaning agents, spray contact pressure.
Ensu- with the express consent of the Einhell Germa- re that no water can seep into the device. The ny AG.
Page 20
10. Faults a) The equipment does not work Check that the battery is charged and whether the charging unit is working. b) An error code is displayed Error code Possible cause Possible remedial measures - The rechargeable battery is subject to - Change the rechargeable battery excessive current.
11. Charger indicator Indicator status Explanations and actions Red LED Green LED Off Flashing Ready for use The charger is connected to the mains and is ready for use; there is no battery pack in the charger Off Charging The charger is charging the battery pack in quick charge mode. The char- ging times are shown directly on the charger.
* Not necessarily included in the scope of delivery! Please register the product warranty of Einhell brand products. Customers must scan the QR Code of the Serial number in the product or QR code on the box, to additional 6 months warranty for the whole battery and battery charger (Note: Promotion is change without prior notice.
Need help?
Do you have a question about the CE-CP 18/180 Li E and is the answer not in the manual?
Questions and answers