Table of Contents
Advertisement
TROUBLE SHOOTING CHART
SYMPTOM
POSSIBLE CAUSE(S)
SOLUTION
Engine fails to start
1. Check fuel tank for gas.
2. Spark plug lead wire
disconnected.
3. Faulty spark plug.
1. Fill tank if empty.
2. Connect lead wire.
3. Spark should jump gap between
control electrode and side elec¬
trode. If spark does not jump,
replace the spark plug.
Hard starting or loss of
power
1. Spark plug wire loose.
2. Dirty air cleaner.
1. Connect and tighten spark plug
wire.
2. Clean air cleaner as described in
engine manual.
Engine overheats
1. Carburetor not adjusted
properly.
2. Air flow restricted.
3. Engine oil level low.
1. Adjust carburetor. See engine
manual.
2. Remove blower housing and clean
as described in the engine
manual.
3. Fill crankcase with the proper oil.
Tine control does not
engage
Belt worn and/or
stretched.
Make control cable adjustment (see
Assembly Instructions) or replace
belt.
NOTE: For repairs beyond the minor adjustments listed above, please contact your local service dealer.
12
Advertisement
Table of Contents
