Table of Contents
Advertisement
de use
6 Before the first
use
b prepare the device for use.
6.1 Start the empty wash cycle
Your device has been thoroughly
tested before leaving the factory. To
remove possible residual water, wash
without laundry for the first time.
Open the program selectorClean
1.
drum / Nettoyage tambourplace.
Close the door.
2.
Pull out the detergent drawer.
3.
Fill approximately 1 liter of tap water
4.
into chamber II.
20
Pour heavy-duty detergent containing
5.
bleach into compartment II.
To avoid foaming, use only half the
amount of detergent recommended
by the detergent manufacturer for
light soiling. Do not use wool
detergent or mild detergent.
Slide in the detergent drawer.
6.
To start the program, click on Start/
7.
Bijvullen / Départ/Rajout press.
aThe display shows the remaining
Program duration.
aThe display shows according to program
mende: "End" .
Start the first wash cycle or turn
8th.
the program selector on Uit /
Arrêtto turn off the device.
→ "Basic Operation", page 29
Advertisement
Table of Contents
