Table of Contents
Advertisement
Disturbance
flashes.
shines.
shines.
flashes.
"E:30/-20"
Cause and troubleshooting
Voltage control system detects impermissible voltage
undershoot.
No fix possible.
▶
A notice:When the power supply has stabilized, the
program continues to run normally.
If the voltage is not reached, the program may be
extended.
No fix possible.
If the voltage is not reached, the program may be
extended.
No fix possible.
Temperature is too high.
Wait until the temperature has dropped.
▶
→ "Cancel program", page 31
▶
Water level is too high.
Choose a suitable pumping program.
▶
→ "Programs", page 24
Door is not closed.
Close the door.
▶
Laundry is jammed in the door.
Remove any trapped laundry.
▶
Drum cleaning required.
→
"Cleaning the drum", page 34
▶
Detergent dosage is too high.
The next time you wash the same load, reduce the
▶
amount of detergent.
Added additional water.
Do not add additional water to the device during
▶
operation.
Solenoid valve defective.
Call customer service.
▶
→
"Customer Service", page 50
Troubleshootingde
41
Advertisement
Table of Contents
