Panasonic DMR-T3040 Operating Instructions Manual page 13

oO.
'VCH Pues TVvDEO REC MODE REC
Numbered
buttons
ToS:
Manual Clock Setting
If an error occurs when carrying out Auto Clock Setting, you may
set the time using the following method:
1 Press [SET UP] to show the menus.
| Channel | CELE ` r
pisc — à i
[ME | [VCR Plus + CH Seting }
PP Aci A
| uum ol ee m c
| WERE] ' i OD
2 Press [A, V] to select "Set Up" and
press [P].
3 Press [A, V]to select "Manual Clock
Setting" and press [ENTER]. -
fibi 7 Manual Clock Setting; ,
4 Press [<, >] to select the item you
want to change and press [A, V] to
change the setting.
MONTH ——— DAY —— YEAR «—-» HOUR (12-hour display)
t 5 TIME ZONE — DST ——. MINUTE ——
DST (Daylight Saving Time): ON or OFF
If you select "ON", the clock is advanced one hour starting
at 2 a.m. on the first Sunday in April and ending at 2 a.m.
on the last Sunday in October.
TIME ZONE:
EST CST —~ MST — PST — AST — HST
(-5)) (-69 (-7 .(-8 Á(-9) (-10)
D Press [ENTER].
The "Set Up" screen reappears and the clock starts.
When you change the time zone, the recording times for programs
recorded before the time zone was changed also change to corre-
spond to the new time zone.
Time Zone Adjust
Adjust the time zone (—1 or +1) if it was not set correctly with auto
clock setting.
You cannot change this setting if you set the clock manuaily.
1 Press [SET UP] to show the menus.
2 Press [A, V] to select "Set Up" and
press [>].
3 Press [A, V] to select "Time Zone
Adjust" and press [ENTER].
D aba mi 45]
mp
[A
ASET UR E A 12225 Time Zone Adjust 1555
I Press [A, V] to select "—1", "0", or
"+1" and press [ENTER].
The "Set Up" screen reappears.
To return to the previous screen
Press [RETURN].
When you are finished
Press [SET UP].
Adding and deleting channels
While this unit is receiving the antenna signal (but not during
recording):
1 Press the numbered buttons to select
a channel.
* You can also use [^ v, CH]
when you are going to delete a channel.
Press [ADD/DLT].
The channel is deleted if it was set or added if it was not set.
For example
N
CHANNEIÑI2{DELETED
ein
Repeat steps 1 and 2 as necessary.
Settin up NE
13
-RQT6637