Canon EOS 3000N Instructions Manual page 47

Av
Aperture-Priority AE
Press the shutter button halfway
to focus the subject.
The shutter speed is set
automatically.
Check the viewfinder display and
take the picture.
• If the shutter speed display does not
blink, a correct exposure will be
obtained.
If the slowest shutter speed blinks, it
indicates underexposure. In such a case,
turn the <
£2^ >
dial to set a larger
aperture (smaller f-number) until the
shutter speed display stops blinking. .
If the maximum shutter speed blinkC it
indicates overexposure. In such a case,
turn the </^> dial to set a smaller'^
aperture (larger f-number) until the shutter
speed display stops blinking. .
Q Aperture Display
The aperture can be set and displayed in full and half stops as shown below.
The larger the number, the smaller the aperture opening will be. The displayable
range of apertures depends on the lens mounted on the camera.
LO LH I.B E.Q
^5 15 M.0
H.S
5.6
B.n B.0
9.5
II 13 IB IS
l^
If no lens is mounted on the camera,
"OD"
will be displayed for the aperture
setting.
47