Canon EOS 3000N Instructions Manual page 43

Take the picture.
• Compose the shot and press the
shutter button completely.
The Difference Between <P> and <a>
• The
<P>
and
<D>
modes set the same shutter speed and aperture
settings automatically for picture-taking.
• The following features can be used with
<P>,
but not with
<D>:
• Continuous shooting
• Manual focusing point selection
• Program shift
• AE lock with the <*> button
• Exposure compensation
• AEB
• Multiple exposures
• Built-in flash ON/OFF
• EX-series Speedlite compatibility
- High-speed sync
- FE lock
About Program Shift
In the Program AE mode, you can freely change the shutter speed and
aperture combination (program) set by the camera while retaining the same
exposure. This is called program shift.
To shift the program, press the shutter button halfway and turn
the <^>
dial until the desired shutter speed or aperture is displayed.
• After the picture is taken with the shifted program, the shifted program is
canceled automatically and the original program is restored.
• Program shift cannot be set when the built-in flash is used.