Table of Contents
Advertisement
D Full Auto Mode
<§> Using Red-eye Reduction
When flash is used in a low-light environment, the subject's eyes may
come out red in the photograph. "Red eye" happens when the light from the
flash reflects off the retina of the eyes.
The camera's red-eye reduction feature turns on the red-eye reduction lamp
to shine a gentle light into the subject's eyes to narrow the pupil diameter or
iris. A smaller pupil reduces the chances of red eye from occurring. Red-eye
reduction can be set in any shooting mode except
<^>
and
<'^>.
c c r
j.uL
liiiiiiii
i:
i
QQOOQOOQQ
OGOOCCO
nrmi
000
0
Red-eye reduction
lamp-on indicator
Move the <^> arrow to the «S>>
icon on the LCD panel.
• Look at the LCD panel and press the
<FUNC.
> button to move the arrow.
((
2
)
6
)
Turn the
dial to set " / " on
the LCD panel.
• Press the shutter button halfway to
return to normal camera operation.
• When red-eye reduction is enabled,
the red-eye reduction lamp-on
indicator will be displayed in the
viewfinder and on the LCD panel
when you press the shutter button
halfway and the lamp lights.
• To cancel red-eye reduction, set "0"
on the LCD panel.
51 r Red-eye reduction will not work unless the subject looks at the red-eye
reduction lamp. Tell the subject to look at the lamp.
• For maximum effectiveness, take the picture after the red-eye reduction lamp
turns off (after 1.5 sec.).
• You can take a picture even while the red-eye reduction lamp is lit.
• The effectiveness of red-eye reduction varies depending on the subject.
■'Sf^'To further increase the effectiveness of red-eye reduction, go to a brighter
environment or move closer to the subject.
27
Advertisement
Table of Contents
