Advertisement
ENG - This product is designed to be installed on wood joist/beam or solid concrete ceilings. Hardware is
included for wood joist/beam and solid concrete installation. Before installing make sure the supporting surface
will support the combined load of the equipment and hardware. Screws must be tightly secured. Do not
overtighten screws or damage can occur and product may fail. Never exceed the Maximum Load Capacity.
Always use an assistant or mechanical lifting equipment to safely lift and position equipment. This product is
intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury. Be
careful not to pinch fingers when operating the mount. For support please call customer care at 1-800-865-2112.
ENG
Symbols
ENG
ENG
Do not overtighten screws.
WARNING
ENG
Front of mount.
WARNING
#
ENG
Skip to step.
F
2
ENG
Screws must get at least three
full turns and fit snug.
2015-06-17
#:056-9083-5
x3
(2021-07-09)
Advertisement
