Basic Operation; Making Calls; Volume Control; Channel Changing - Sprint sp9127 User Manual

Basic Operation

Volume Control

While you are on a call, press
will display the relative volume setting as you adjust it. When you reach the maximum or
minimum volume setting, you will hear a double beep.

Channel Changing

If you experience noise or interference while on a call, you may be too
far from the Base Unit, or in an obstructed area. Try moving to a different
location. If this does not improve the transmission, press PROG/CHAN.
You can press this key more than once, if necessary.
NOTE: This feature only operates while you are on an active call.

Making Calls

Press ON. Dial the phone number.
Press OFF to end your call.
-OR-
Dial the phone number. Use the
if you make a dialing mistake. Then press ON.
Press OFF to end your call.
When the Handset is in use, the IN USE/CHARGING
light on the Base Unit will flash. When the Handset is in
the Base Unit cradle, the IN USE/CHARGING light glows
steadily.
to raise the inbound volume and
10
key to backspace
to lower it. The Handset