Flash Function; Redial; Mute; Conference Call - Qwest qw5872 User Manual

5.4ghz digital spread spectrum
Table of Contents

Advertisement

Telephone operation

Flash function

You can use your phone with services such as call waiting . When you receive a call waiting signal,
simply press the FLASH key to switch to the new call . Press FLASH again to switch back to the
original call .

Redial

Press REDIAL to display the last telephone number dialed from the handset or base unit (up to 32
digits) . Use
or
to scroll through the five previously dialed numbers.
When the beginning or the end of the redial list is reached, a double beep will sound .
When the desired number is reached, press ON or SPEAKER ( ) to dial .
• Press DELETE/MUTE on the handset (or DELETE on the base) to delete the number from the
redial memory .
Press OFF/CLEAR on the handset (or EXIT on the base) to exit the redial review list .

Mute

• During an active call, press the MUTE key on handset or base unit
to disable the microphone . The screen will display:
• Press MUTE again to return to normal two way conversation .
MICROPHONE ON will display briefly.

Conference call

Your phone is capable of supporting conference calls between system handsets or base . It is possible to
establish a conference between any two handsets (or a handset and the base) and the external line .
If a handset or base already has a connection to the external line, and
any other handset or base goes off-hook, a conference is immediately
established . The handsets will show:

Volume

Press the VOLUME button
listening volume . Each button press raises or lowers volume by one level . When you change the
volume level, the new setting is saved . The new volume level will be applied each time you use the
handset, speakerphone or headset .
on the handset or press the VOLUME button
PHONE
00:00:25
MICROPHONE MUTED
MUTE
PHONE
00:00:25
on the base to adjust
• Use FLASH to
access other
phone company
subscriber
services, as
described by your
provider .
• To end a
conference call,
press OFF at he
handset or
on the base . The
conference call will
not be terminated
until all handsets
or base unit have
disconnected from
the call .
5

Advertisement

Table of Contents
loading

Table of Contents