Headset Operation; Belt Clip - Qwest qw2652 Owner's Manual

Headset Operation

Your 2652 cordless telephone is equipped with a 2.5mm Headset Jack for
use with an optional accessory Headset for hands-free operation.
To purchase a Headset, call 1-800-651-6791.
Once you have a compatible 2.5mm Headset, locate the Headset Jack on the
Handset. Connect the plug on the Headset cord to the jack (covered with a
small rubber flap) on the cordless Handset. The plug should fit securely. Do
not force the connection.
Operation
NOTE:
Whenever a compatible Headset is
connected to the cordless Handset,
the microphone on the Handset will be
muted. This is done to limit the effect
of background noise.

Belt Clip

The Handset is also equipped with a
detachable belt clip. Align the pins on
the inside edge of the clip with the
notches on the sides of the Handset.
The belt clip should snap securely into
place. Do not force the connection.
41