Table of Contents
Advertisement
Handset and Base Operation
Mute Function
During an active call pressing either the MUTE soft key on the Handset or
the MUTE key on the Base (when in speakerphone mode), will disable the
microphone. Press the MUTE key again to return to normal 2-way conversation.
Flash Function
You can use your 2652 with services such as Call Waiting. When you receive
a call waiting signal, simply press the ON/FLASH key on the Handset or the
FLASH key on the Base (when in speakerphone mode) to Flash the line.
Hold Function
From the Handset:
•
Press the HOLD soft key to place
a call on hold. To return to the call
press the ON or HANDSFREE key.
From the Base:
•
During an active call, press the
HOLD key to place a call on hold.
The SPEAKER LED will flash to
indicate a call is on hold.
•
To return to the call press either
HOLD or SPEAKER.
Volume Control
From the Handset:
During an active call press the
key, then use the
keys to adjust the earpiece volume.
From the Base:
During an active call simply press the
Volume
the speakerphone volume. You will
hear a special tone when you reach
the highest or lowest setting.
26
soft
VOL
and
soft
keys to adjust
Advertisement
Table of Contents
