Table of Contents
Advertisement
Name and Number Announce Caller ID
• Press the RECORD key. You will be prompted
to RECORD AFTER TONE.
into the handset microphone to record up to
3 seconds of audio.
• You can press the STOP key when you are
done, or simply wait for recording to
automatically stop after 3 seconds.
• Press PLAY to review the name and number
announcement. The audio will playback from
the Base Unit speaker.
• You can also choose to ERASE the
announcement or RECORD a new
announcement.
From RECORD NEW function:
• In the idle (OFF) mode, press MENU and use
the scroll keys to select ANNOUNCE CID,
then press OK.
• Use the scroll keys to select RECORD NEW,
and then press OK.
• Use FIND or scroll key to locate the
phonebook record that you want to record
your announcement.
• After you have located the desired entry, press
the EDIT softkey. The Handset will display:
• Press RECORD. If there is already an
announcement. The display will prompt
ANNOUNCEMENT
RECORDED. However, you can record over
the old audio by pressing the RECORD
softkey twice, then re-record.
• If there is no announcement recorded, press
RECORD softkey to make the recording.
Review, Play, Erase or Re-Record a
Name and Number Announcement
• In the idle (OFF) mode, press MENU and use
the scroll keys to select ANNOUNCE CID,
then press OK.
• Use the scroll keys to select REVIEW, and
then press OK.
• Use FIND or scroll key to locate the record
that you want to playback.
• Press SELECT to review the record. You can
use:
• ERASE: Delete current name and number
announcement.
• PLAY: Playback the current name and number
announcement.
• RECORD: You can re-record your current
name and number announcement
Speak directly
ALREADY
.
35
Advertisement
Table of Contents
