Registration And Operation - Qwest qw2652 Owner's Manual

Registration and Operation

Registration and Operation of the 2603 Accessory Handset
The accessory Handset consists of the following:
Setup of the 2603 Accessory
Handset
1. Plug the AC power adapter into
an electrical outlet, then the DC
connector into the bottom of the
Charger Unit.
2. Remove the Handset battery
compartment cover by pressing
on the indent and sliding
downward.
3. Place the new battery pack in the
Handset, with the metal contacts
aligned with the charge contacts
in the battery compartment.
4. Replace the battery compartment
cover by sliding it upward.
5. Place the Handset in the Charge
Cradle, and allow it to charge
for 10-12 hours. After the initial
charge, a maintenance charge
of 8 hours should be sufficient.
11