Base Speaker Operation; Line In Use Indication; Low Battery Indication - Qwest qw2652 Owner's Manual

Handset and Base Operation

Base Speaker Operation

The Base of your 2652 is equipped
with a full duplex speaker. This is a
very useful feature for handsfree
conversations or conference calls at
the Base Unit. For more information,
refer to MAKING CALLS in the
HANDSET AND BASE OPERATION
section.

Line in Use Indication

On the Handset:
When the telephone line is currently
being used by a system Handset or
the 2652 Base, a status message
similar to this will display on idle
Handset(s):
When the telephone line is currently
being used by a parallel set (a
telephone device other than the
2652 on the same line) the phone
icon will remain on steadily, and
EXTENSION IN USE will be displayed.
On the Base:
When a system Handset or a 2652 Base is currently being used, the IN USE
LED on the Base will illuminate steadily. When a parallel set is currently being
used, the IN USE LED on the Base will flash.

Low Battery Indication

When a low battery is detected, the Battery icon will flash and a warning beep
is played. The status message LOW BATTERY will also be displayed when
the Handset is in idle mode. To prevent an unexpected call drop, a drained
Handset battery should be replaced by a fully charged spare battery.
29