Setting And Wiring; Connection To Plc - IDEC WB1F Series User Manual

3

Setting and Wiring

This chapter describes the connection between the WB1F and PLC.
3. 1

Connection to PLC

To use the PLC connection function, configure the WB1F model and the PLC; then, connect the WB1F model and PLC
communication interfaces.
To find the WB1F model, main unit and PLC interface specifications, please refer to the respective user's man-
z
uals for each.
Please refer to the PLC manual for more information about PLC configuration.
z
Communication interface
3-1