1 Overview
2. 5
Start and End
The PLC connection can be started and ended in the following conditions:
Start condition
With Address "06C0 (PLC connection – function Enabled) in the setting parameter of the WB1F set and stored to "01 (En-
able), turn the power from OFF to ON.
When the start condition is established, the Indicator LED (Green) starts flashing.
After blinking stops, the PLC connection starts.
End condition
Depress the Operation button of the WB1F for 5 seconds.
z
Set the PLC Connection End Bit in the Special Area of the PLC data memory to "1".
z
When the end condition is established, the Indicator LED (Red) starts blinking.
After blinking stops, the PLC connection ends.
2 Operation Specifications
2-6
3 Setting and Wiring
4 Menu Sheet
Start and End