Electrical Safety; Handling Safety; Installation Safety - Grundig GSBS5100 User Manual

Safety instructions
5.
Store the product so that it shall not be
tipped over.
6.
Do not allow children to play with the
scrapped product.
• Do not dispose of the product
by throwing it into fire. Risk of
explosion.
• If there is a lock available in the
product's door, keep the key out
of children's reach.

1.3 Electrical safety

The product shall not be plugged
•
into the outlet during installation,
maintenance, cleaning, repair, and
transportation operations.
If the power the cord is damaged, it
•
shall be replaced by authorized service
only to avoid any risk that may occur.
Do not tuck the power cord under the
•
product or to the rear of the product.
Do not put heavy items on the power
cord. The power cord should not be
bent, crushed, and come into contact
with any heat source.
Do not use an extension cord, multi-
•
plug or adaptor to operate your
product.
Portable multi sockets or portable
•
power supplies may overheat and
cause fire. Thus, do not have a multi-
plug behind or in the vicinity of the
product.
The plug shall be easily accessible. If
•
this is not possible, a mechanism that
meets the electrical legislation and
that disconnects all terminals from
the mains (fuse, switch, main switch,
etc.) shall be available on the electrical
installation.
Do not touch the plug with wet hands.
4
•
When unplugging the appliance, don't
•
hold the power cord, but the plug.
When positioning the appliance,
•
ensure the supply cord is not
trapped or damaged
Do not locate multiple portable
•
socket-outlets or portable
power supplies at the rear of the
appliance.

1.4 Handling Safety

This product is heavy, do not handle it
•
by yourself.
Do not hold the product from its door
•
while handling the product.
Be careful not to damage the cooling
•
system and the pipes while handling
the product. Do not operate the
product if the pipes are damaged, and
contact an authorized service.

1.5 Installation Safety

Contact the Authorized Service for
•
the product's installation. To prepare
the product for installation, see the
information in the user guide and make
sure the electric and water utilities
are as required. If the installation is
not suitable, call a qualified electrician
and plumber to have them make the
necessary arrangements. Otherwise,
electric shock, fire, issues with the
product or injuries may occur.
Check for any damage on the product
•
before installing it. Do not have the
product installed if it is damaged.
Place the product on a level and
•
hard surface and balance with the
adjustable legs. Otherwise, the
refrigerator may tip over and cause
injuries.
The product shall be installed in a
•
dry and ventilated environment. Do
Refrigerator / User Guide
4 /44 EN