Kenwood VR-2090 Instruction Manual page 43

VR-2090/VR-2080/KRF-V88810/KAF-V7771D (En/K)
2 The control in "Room B" is possible when the analog inputs are used.
Preparation General operation flow
The folowing preparatory setups are required to control the Selecting the speakers
audio in "Room B".
B Selecting the "Room A" or "Room B" control mode
e Perform the operations described in "Connections for remote
13] Selecting the component to be controlled
control of other components" and "Setup for multi-room op-
| 4] Controlling the component
eration".
« For the connection to the speaker terminals or "PREOQUT™" jacks,
see "Making connections to another room (Room B}"
SANA ar tae. ok B o eae ah Aen OEM BE ae BEM tHe o n
7 | Select the speakers.
When speakers are used : When SECOND ROOM PREOUT are used :
er
- eA O@AON : Listening in "Room A"
@ When SECOND ROOM PREOUT jack is used, sound output from
SPEAKERS @BON _ : Listening in "Room B" "Room B" speaker,
eSE> -op @A+BON : Listening in both "Room A"
and "Room B"
QA+B OFF: Muting all speakers
2] Select the "Room A" or "Room B" control made.
Operation for displaying the "Setup Multi Room" menu screen
shown on the left :
@ Select the "Main Menu" icon. |
© Select the "Stp" icon. i
© Select the "Multi Room" icon. |
Operation in the "Setup Multi Room" menu screen :
@ Select and set the "Multi Room" icon to "Yes".
@ Select and set the "Zone Select" icon to "Room A" or
"Room B" according to your current location.
Operation of main unit keys :
@ Press and hold the DISPLAY MODE key for more than 2
seconds to set the IR RECEIVER setup to "IR RECEIVER B".
Fl Select the component to be controlled.
28 @am 3 @ The icons that can be selected may be restricted depending on the
A) model and setup
Select the control operation.
@ Select the desired icon from the control menu screen.
@ Unless the IR OUT FOR REMOTE (to be released in the future) is
connected, the main unit status cannot be displayed on the RC unit
during control in "Room B".
@ While "Multi Room" is set to "Yes", part of the system control
operation, which is a "SL16" function, is not available.
Display on the receiver main unit
The main unit displays the name of the component selected for "Room A".
Example: During playback of the CD player in "Room A" and the tuner in "Room B"...
+
The main unit displays the CD input.