Kenwood VR-2090 Instruction Manual page 39

peen
pera tact ae rE Sees Me
VR-2090/V8-2080/KAF-VB88 10/KAF-V777 1D (En/K)
General operation flow
Gi Selecting the icon of the component to be controtled from the
fixed segments
ie) ©. @ @ os. ee iS
FRB SSSR ee
@ The selected input changes according to the selection
Performing operation in the menu screen of the selected
component
# Complete the operation in "Assigning the connected components
to the selected inputs" beforehand. The control icons for the non-
assigned components are not displayed.
@ Although the control menu screen of each component is variable
depending on the setup code, this section uses the mast typical
control menu screens for ease of description.
co pemyommepmeniens
Remote control of tuner
Cpe RN SS
i Select the "Tuner" icon.
@ The "Tuner" input is selected.
B Select the icon to be controlled.
Remote control of DVD player
@ tis necessary to assign the DVD player to one of the "Video" inputs
previously.
( Select the "Video 1, 2,3 or 4" icon.
e The "Video1/ 2/ 3/ 4" input is selected.
Pee ee INT
Bi Select the icon to be controlled.
|_Video2:DVD(Scan) __@|
BjcanGd
CirJ
Pwr
: Power
Cog Skip_jCfet.) Cir : Clear
Mode }((F1 ){ F2 t4okey| Ret. : Return
(Pwr _)(F3 (Fa jl Pad
@ The "Sean", "Skip" and "Slow" screens are available
Remote control of MD recorder
@ It is necessary to assign the MD recorder to the "MD/ Tape1" input
previously.
@ It is necessary to assign the LD player to one of the "Video" inputs
previously.
Ei Select the "MD/Tape" icon.
e@ The "MD" input is selected.
B Select the icon to be controlled.
D / Tapet:MD
> C0 JG brnG 2)!
O}e EM (4)[5)(5
<i }(o>){ Mode _){7)[s)(9
+106 }fo)G-10)
@ Select the "Videot, 2, 3 or 4" icon.
e@ The "Videot/ 2/ 3/ 4" input is selected.
BSelect the icon to be controlled.
deo2:LD
EFA 1DCEEUM2)G) pwr : Power
Ii J Jaysile
<i)(b>)[ Mode _J[7)s}9
Pwr_){Video CD j(o)+-10)
Remote control of cassette deck player
@ itis necessary to assign the cassette deck player to the "MD/ Tape?"
input previously.
Select the "MD/Tapet" icon.
@ The "Tape" input is selected.
B Select the icon to be controlled.
. : One-Touch Edit