100M ENTERTAINER STEREO MIXER
OWNER'S MANUAL
FEATURES
INPUTS 1 THROUGH 8
•
Transformerless balanced mic/line input
•
High-impedance mic input
•
Gain control with overload LED
•
Independent monitor send
•
Effects-reverb send
•
Three-band EQ
INPUTS 9 AND 10
•
Aux inputs for high-impedance or line-level
sources
•
Independent monitor send
MASTER SECTION
•
Two independent power amplifiers
•
Two eight-band graphic equalizers
•
Flourescent bargraph meters
•
Peak-limited spring reverb
•
Master reverb level and contour controls
•
Reverb footswitch jack
•
48-volt phantom power for condenser
microphones
•
Patented Maximum Power circuitry - prevents
amplifier clipping
•
Mono output master control
•
Patching access jacks for mixer, equalizers
and amplifiers
•
Effects send and return system for external ef¬
fects
•
Stereo/Mono mode switch
•
Switch between normal stereo operation and
mono with monitors
DESCRIPTION
The 100M Entertainer Mixer is a stereo mixer with ten
inputs and two built-in 150-watt (peak) per channel
power amplifiers.
The unit has a balanced,
lightweight and durable chassis with a recessed front
panel for control knob protection.
The mixer consists of eight channel inputs which may
be used as either a balanced mic input or a high-im¬
pedance mic input. Each of these channels have a
gain control with an overload LED, independent
monitor sends, a three-band equalizer, effects-
reverb sends, and slide faders.
The mixer also contains two auxiliary input channels
for high-impedance or line-level sources. These
channels have indepedent monitors sends, pan pots
and slide faders.
The master section of the mixer is made up of two
power amplifiers, two eight-band equalizers, peak-
limited spring reverb and master reverb level con¬
trols. A stereo/mono mode switch allows switching
between normal stereo operation and mono with
monitors. The mode switch assigns amplifiers and
equalizers with no patching required.
2