Table of Contents
Advertisement
100M ENTERTAINER STEREO MIXER
OWNER'S MANUAL
amplifier output jacks.
6. Set the SUB L and SUB R controls to their
lowest setting and both graphic equalizers'
controls to the 0-dB mark (centered).
7. Set the MODE switch to the LVR MAINS position.
8. If condenser microphones are connected, turn
the PHANTOM POWER switch on.
9. Turn on the 100M.
10. Adjust the GAIN controls to the 12 o'clock posi¬
tion.
11. Set the channel PAN and EQ controls to about
the 12 o'clock position.
12. Set the channel FADERS to the 0-dB setting on
their scale.
13. Bring up the SUB L and SUB R slowly while
speaking into one of the microphones until sound
is heard.
14. If the CLIP indicators on any channel illuminate,
use a lower GAIN control setting.
15. If feedback is heard before sufficient volume is
reached, use the equalizers to minimize it.
16. Monitors will require an external equalizer (op¬
tional) and amplifier.
MONO PA
The 100M is also ideal as a mono mixer-amplifier.
Again, its versatility allows it to stand alone, or be the
nucleus of a much larger system.
Use the mono mode of the 100M in situations where
seating or other physical constraints prevent
audience members from hearing both loudspeaker
systems. Use of the stereo mode in this situation
might cause some listeners to only hear part of the
material.
14
Advertisement
Table of Contents
