Related Manuals for Otto NUSA RATTAN OTNUSARTBK
Summary of Contents for Otto NUSA RATTAN OTNUSARTBK
- Page 1 ASSEMBLY INSTRUCTIONS NUSA RATTAN 2 DRAWER DESK 1200 ITEM CODE: OTNUSARTBK This design and instruction booklet is subject to copyright. 1 Carton www.officeworks.com.au For missing hardware call (03) 9310 3011 or email hardware@kyvas.com.au 1/20...
- Page 2 Estimated Assemble Time: 50min To view an assembly video, go to https://www.officeworks.com.au/ Search the product by item code or name: Click on the icon to watch the video. (03) 9310 3011 Tools Required CAUTION Do not use tools other than those required, as this can damage your new item.
- Page 3 Part Overview 3/20...
-
Page 4: Part List
Part List Parts located in Carton - OTNUSARTBK 4/20... -
Page 5: Hardware List
Hardware List Hardware Pack located in Carton - OTNUSARTBK Allen Key M6-size (Φ7 x 38mm) (Φ15 x 10mm) X 11pcs X 32pcs ( Φ6 x 35mm) ( Φ 8 x 30mm) ( Φ 3.5 x 12mm) X 32pcs X 16pcs (M6 x 22mm) (M6 x 30mm) X 2pcs... - Page 6 Assembly Step 1 Separate slider components (I) x4 Locate tab and press as indicated whilst pulling sliders apart to release sections. ) x4 ) x4 Separated components now become This procedure can be viewed in the assembly video. Video details on Page 2 of this booklet. 4sets 6/20...
- Page 7 Step 2 Front Front 6pcs 2pcs Step 3 Front Front Front 4pcs 2pcs 7/20...
- Page 8 Step 4 16pcs 8/20...
- Page 9 Step 5 8pcs Step 6 Tighten cam locks once panel are in place. 4pcs 9/20...
- Page 10 Step 7 Tighten cam locks once panel are in place. 10pcs Step 8 Tighten cam locks once panel is in place. 2pcs 10/20...
- Page 11 Step 9 8pcs Step 10 11pcs 11/20...
- Page 12 Step 11 4pcs Step 12 *Note: Do not tighten the screw H fully until you have completed Step 12pcs 12/20...
- Page 13 Step 13 *Note: Once all G and H screws are in place, fully tighten to complete step. 2pcs 2pcs Step 14 8pcs 13/20...
- Page 14 Step 15 8pcs Step 16 Tighten cam locks once panel are in place. 8pcs 14/20...
- Page 15 Step 17 Step 18 Tighten cam locks once panel is in place. 4pcs 15/20...
- Page 16 Step 19 Front Front 6pcs 2pcs Step 20 Tighten cam locks once panel is in place. 4pcs 16/20...
- Page 17 Step 21 Front Front 6pcs 2pcs Step 22 2sets 17/20...
- Page 18 Step 23 Note: Move the inner ball bearing sliding part as shown below to the front end on both sides before inserting the drawer. Note: Insert the sliding part (at drawer section) into ball bearing part gently as shown below. Top of unit - 40kg Drawer - 5kg Your NUSA RATTAN 2 DRAWER DESK 1200 is now complete and ready for use!
-
Page 19: Care Advice
Care Advice Care Instructions - Painting Finish Desk Keep away and protect from direct sunlight and heat. Do not place sharp materials(knife, fork, etc) directly onto your furniture as sharp material may scrape and damage the finish. Clean up spills quickly. Water left over a prolonged period of time may cause damage. - Page 20 Warranty 3 years Product Warranty – valid for Australian customers only Officeworks Ltd warrants that this product will be free from defects and work as intended for 3 years from the date of purchase by the original customer. If the product has any defects or does not work as intended during the Warranty Period, This warranty does not apply: to cosmetic damage;...
Need help?
Do you have a question about the NUSA RATTAN OTNUSARTBK and is the answer not in the manual?
Questions and answers