Nortec EL24i-16 Operation Manual page 7

EL24i-16
Notes
The charging functions cannot be selected separately but provide a closed
functional sequence. This is started when the device is switched on.
The entire charging process starts automatically:

after switching on the supply voltage with connected battery,

after mains failure and return of the supply voltage,

If the lower turn-on voltage of 25.4V during the trickle charge e.g. is
exceeded by connecting consumers for more than 10 seconds.
Charging cables and batteries must be checked for contamination and per-
fect mechanical and electrical condition before connection.
© Nortec-Electronics 2019
Operation manual Operation manual
7
Page13 Page14
Opticalindicators
EL24i-16
© Nortec-Electronics 2019