General Information; Safetyinstructions; Intendeduse - Nortec EL24i-16 Operation Manual

EL24i-16

General information

2
We congratulate you on the acquisition of the EL24i-16
This robust housing combines two functions:
 Battery charger
 Battery tricklecharger
State-of-the-art microprocessor technology ensures that your battery is
optimally charged with the UIUa characteristic, which guarantees maximum
battery life. The UIUa characteristic is recommended by leading battery
manufacturers. The experience of many years of observations of battery
charging and charging in large fleets (partly with stored vehicles) is
consistently implemented in this device in modern charging technology. An
intact deeply discharged battery is brought back to the best possible state of
charge and held there. It does not have to be opened or separated from the
vehicle. Defective batteries are detected automatically.
Light emitting diodes keep you informed about the status of the battery and
the device at all times.
© Nortec-Electronics 2019
Operation manual Operation manual
3
Please read the operating instructions carefully before first use and keep
them in a safe place.

3.1 Intendeduse

The charger is designed to charge 24V the Ansmann AG LiFePo4 battery
pack (article Z0600660). The charger can be connected directly to the bat-
tery with clamps or via suitable plug connectors.
The EL24i is approved for private and commercial use.
Each device is tested for all functions before delivery and delivered in a safe
and secure condition. When used as intended, the device is safe to operate.

3.2 Safetyinstructions

The battery charger EL24i-16 should only be operated in perfect condition
while observing the operating instructions. The safety and operating
instructions must be observed.
In the case of operator errors or misuse, there are risks for:
All persons involved in the installation, commissioning, operation,
maintenance and upkeep of the device must:
Unauthorized intervention or manipulation of the device is not permitted.
Furthermore, the local safety regulations must be observed.
Page5 Page6
Safetyinstructions

body and life of the operator,

the equipment and other property of the operator,

the function of the device.

be appropriately qualified,

pay close attention to these operating instructions and

follow the applicable rules for occupational safety.
EL24i-16
© Nortec-Electronics 2019