VTech ia5824 User Manual page 34

Troubleshootng
Problem Suggeston
The CHARGE/IN
• This is a signal that the battery is very low, completely depleted, or when there is no electrical
USE Indicator on the
telephone base is • Ensure the connector of the battery is securely plugged into the handset and place the handset in
flashing
There is no dial tone. • First, try all the above suggestions.
• Move the cordless handset closer to the telephone base. It might be out of range.
• The telephone line cord might be malfunctioning. Try installing a new telephone line cord.
• Disconnect the telephone base from the telephone jack and connect a different telephone. If there
contact between the battery and the telephone base.
the telephone base for charging.
is no dial tone on the telephone either, the problem is in your wiring or local service. Contact your
local telephone company.
www.vtechphones.com