Table of Contents
Advertisement
Removing the drill bit
To remove the drill bit, pull the chuck cover down all the
way and pull the drill bit out.
Fig.18
► 1 . Drill bit 2. Chuck cover
Removing the dust cup set
To remove the dust cup set, follow the steps below.
1.
Loosen the thumb screw on the side grip. Remove
the side grip from the tool.
1
Fig.19
► 1 . Thumb screw
2.
NOTE: If it is difficult to remove the dust cup set,
remove the claws of the dust cup one by one by
swinging and pulling the root of the dust cup.
1
2
Fig.20
► 1 . Dust cup
NOTE: If the cap comes off from the dust cup set,
place it back to the original position.
To place the cap back to the original position, follow the steps below.
1.
the dust cup set attachment unit while the bellows is unlocked.
Fig.21
► 1 . Bellows 2. Attachment unit
2.
Fig.22
► 1 . Cap 2. Attachment unit
12 ENGLISH
Hold the root of dust cup and pull it out.
Turn the bellows counterclockwise and remove it from
1
2
Set the cap back in place with its lettered side facing upwards.
2
1
1
1
2
Advertisement
Table of Contents
