Makita DUH507SF Instruction Manual page 10

5. Remove the blade cover, and then attach it to the
new shear blades.
Fig.9
► 1 . Blade cover
Adjust the hole positions by turning the gear as
6.
illustrated.
Fig.10
► 1 . Gear
7. Make sure the resin sleeves are attached on the
shear blades.
1
Fig.11
► 1 . Resin sleeve
8. Apply some grease provided with the new shear
blades as illustrated.
1
Fig.12
► 1 . Grease
9. Hold the guide bar, and then slide out the shear
blades as shown in the figure.
1
Fig.13
► 1 . Guide bar 2. Shear blades
10. Attach the dust guard to the shear blades.
Fig.14
► 1 . Dust guard
10 ENGLISH
1
1
1 2
1