Makita VC008GT202 Instruction Manual page 14

When the filter bag is already full,
NOTICE:
replace with new one. When the dust bag is
already full, empty it. Continuous use with the filter
bag/dust bag full results in reduced suction power.
NOTICE:
To prevent dust from getting into the
motor:
Make sure that the filter bag/dust bag is
—
installed before use.
— Do not use a broken or ripped bag.
Otherwise the motor may be broken.
NOTICE:
Do not fold the cardboard at its open-
ing when installing the filter bag/dust bag.
The filter bag/dust bag for the cleaner
NOTICE:
is an important component for maintaining the
appliance performance. Using non-genuine filter
bag/dust bag may cause smoke or ignition.
NOTE: When the filter bag/dust bag is not installed in
the cleaner, the front cover does not close completely.
Fig.25
1. Unlock the lever and open the dust box cover.
1
Fig.26
► 1 . Lever 2. Dust box cover
Insert the filter bag into the slit on the upper side of
2.
the room as illustrated.
1
2
Fig.27
► 1 . Slit 2. Filter bag
When using the dust bag, insert the brim of the dust bag
into the slit.
1
3
Fig.28
► 1 . Slit 2. Brim 3. Dust bag
2
14 ENGLISH
2