Makita GA041GZ02 Instruction Manual page 14

Installing abrasive cut-off / diamond
wheel
Optional accessory
When using an abrasive cut-off
WARNING:
/ diamond wheel, be sure to use only the special
wheel guard designed for use with cut-off wheels.
NEVER use cut-off wheel for side
WARNING:
grinding.
1
2
Fig.11
► 1. Abrasive cut-off wheel / diamond wheel 2. Wheel
guard for abrasive cut-off wheel / diamond wheel
Clip-on cutting wheel guard
attachment
Optional accessory
NOTE: For cutting-off operations, a clip-on cutting
wheel guard attachment can be used with the wheel
guard (for grinding wheel).
Not available in some countries.
Fig.12
Installing wire cup brush
Optional accessory
CAUTION:
Do not use wire cup brush that is
damaged, or which is out of balance. Use of dam-
aged brush could increase potential for injury from
contact with broken brush wires.
Fig.13
► 1. Wire cup brush
Installing wire wheel brush
Optional accessory
CAUTION:
Do not use wire wheel brush that
is damaged, or which is out of balance. Use of
damaged wire wheel brush could increase potential
for injury from contact with broken wires.
CAUTION:
ALWAYS use guard with wire
wheel brushes, assuring diameter of wheel fits
inside guard. Wheel can shatter during use and
guard helps to reduce chances of personal injury.
Fig.14
► 1. Wire wheel brush 2. Wheel guard
14 ENGLISH
1
1
2