en Basic settings
Press and hold the two
▶
duced Ironing and Finished in/
Time Dry buttons for approx.
3 seconds.
So that the programme currently
running is not cancelled, the pro-
gramme selector must be set to
the initial programme.
goes out in the display.
a
Basic settings
16 Basic settings
You can configure the basic settings
Basic settings
for your appliance to meet your
needs.
16.1 Overview of the basic
settings
Programme selector with programme
positions
Set the volume of the signal
2
at the end of the programme:
0 (off) to 4 (very loud)
Set the volume of the signal
3
tone emitted when the but-
tons are pressed:
0 (off) to 4 (very loud)
Activate (On) or deactivate
4
(OFF) the reminder to clean
the drum.
Display the number of fin-
5
ished programmes.
34
Re-
16.2 Changing the basic set-
1.
2.
a The display shows the current
3.
4.
5.
Cleaning and servicing
17 Cleaning and servi-
1
2
To keep your appliance working effi-
Cleaning and servicing
3
ciently for a long time, it is important
to clean and maintain it carefully.
4
5
17.1 Cleaning the drum
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
▶
▶
▶
tings
Set the programme selector to po-
sition 1. → Page 34
Press
Spin Speed and, at the
same time, turn the programme
selector to position 2.
value.
Use the programme selector to se-
lect the required basic setting.
→ Page 34
To change the value, press
ished in/ Time Dry.
To save the changes, switch off
the appliance.
cing
CAUTION
Regularly run a programme for
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
every operation with the door
open, and leave the detergent
drawer to dry.
Run the Cottons 90° programme
without laundry but with washing
powder that contains oxygen
bleach or a a cleaning agent for
Fin-