Cleaning And Maintenance - IKEA NUTID HF274 Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

ENGLISH
Cleaning and maintenance
WARNING:
- Never use steam cleaning equipment.
- Disconnect the appliance from the power
supply.
IMPORTANT: do not use corrosive or
abrasive detergents. If any of these products
accidentally comes into contact with the
appliance, clean immediately with a damp
cloth.
Clean the surfaces with a damp cloth.
If it is very dirty, add a few drops of
washing up detergent to the water.
Finish off with a dry cloth.
IMPORTANT: do not use abrasive sponges
or metallic scrapers or scourers. Over time,
these can ruin the surface.
Use detergents specifically designed for
cleaning the appliance and follow the
manufacturer instructions.
IMPORTANT: clean the filters at least
monthly to remove any oil or grease
residuals.
Lamp maintenance:
1. Disconnect the hood from the power
supply.
2. Replace the damaged lamp.
3. Only use halogen lamps 20W max GU4
- 12V - Ø 35mm - 30° - taking care not
to touch them with hands.
Replacing the inside lamps
First unscrew the screws.
Pull the pattern downwards and unscrew the
damaged lamp; only use 40W max (E14)
olive-shaped lamps.
Grease filters:
The metal grease filter has an unlimited life
and must be cleaned once a month by hand
or in a dishwasher at a low temperature and
with a short cycle.
Cleaning in a dishwasher may cause
discolouring of the grease filter, but its
filtering efficiency is unaffected.
Grease filter maintenance:
1. Disconnect the hood from the power
supply.
2. Remove the grease filter by pulling the
spring release handle.
9

Advertisement

Table of Contents
loading

Table of Contents