Advertisement
ENGLISH
Cleaning and maintenance
WARNING:
- Never use steam cleaning equipment.
- Disconnect the appliance from the power
supply.
IMPORTANT: do not use corrosive or
abrasive detergents. If any of these products
accidentally comes into contact with the
appliance, clean immediately with a damp
cloth.
•
Clean the surfaces with a damp cloth.
If it is very dirty, add a few drops of
washing up detergent to the water.
Finish off with a dry cloth.
IMPORTANT: do not use abrasive sponges
or metallic scrapers or scourers. Over time,
these can ruin the surface.
•
Use detergents specifi cally designed for
cleaning the appliance and follow the
manufacturer instructions.
IMPORTANT: clean the fi lters at least
monthly to remove any oil or grease
residuals.
To clean the grease fi lter
The metal grease fi lter has an unlimited life
and must be washed once a month by hand
or dishwasher at low temperature and with
a short cycle. With cleaning in a dishwasher
the grease fi lter may become dull; this does
not effect its fi ltering capacity.
Grease fi lter maintenance:
1. Unplug the appliance or disconnect the
power supply.
2. Remove the grease fi lters: pull the spring
release handle, then remove the fi lter
downwards.
3. After cleaning the grease fi lter, remount
in reverse order ensuring the entire
extraction surface is covered.
Charcoal fi lter maintenance
1. Unplug the appliance or disconnect the
power supply.
2. Remove the grease fi lter
3. If the carbon fi lters are already mounted
(two fi lters covering the motor protection
grille) and need renewing, turn the
central handle anticlockwise until the
fi lters release.
4. If the fi lters are not already fi tted locate
one on each side to cover both motor
protection grilles, then turn the central
handle of the fi lters clockwise.
5. Refi t the grease fi lters.
Charcoal fi lter is neither lavable nor
regenerable.
Replace the charcoal fi lter every 4
months.
8
Advertisement
