Denon DBT-3313UD - UNIVERSAL AUDIO/VIDEO PLAYER Quick Start Guide

Welcome

This guide provides step-by-step instructions for setting up your player.

If you have setup problems:
If you need additional help in solving problems, contact DENON customer service in your area.
See the address sheet included in the box.

Before You Begin

What's In the Box

Remote control unit	Batteries	Denon Link HD cable	HDMI cable
Player			Power cord
Safety Instructions	Service network list	Getting Started	Owner's Manual

Required for setup

TV	HDMI cable
Receiver	Ethernet cable

Note that the illustrations in this manual is for explanation purposes and may differ from the actual unit.

Setup Steps

There are five steps to the setup process.remote control unit

1. Install batteries in the remote control unit
2. Connect the player to your device
3. Turn on the power
4. Insert the disc and begin playback
5. Playback of Internet content

1. Install batteries in the remote control unit
   
2. Connect the player to your device
   
3. Turn on the power
   1. Turn on player.
      
   2. Turn on receiver.
      Select the appropriate HDMI input on your receiver.
      
   3. Turn on the TV.
      Select the appropriate HDMI input on your TV.
      
4. Insert the disc and begin playback
   
5. Playback of Internet content
   1. Network connection
      
   2. Playback
      

www.denon.com