Cancelling The Washing Programme; Cancelling The Drying Programme; Resuming The Programme When The Programme Status Is Rinse Hold; Unloading The Laundry - Bosch WNG244A0ES User Manual And Installation Instructions

Table of Contents

Advertisement

Close the door.
4.
Press
⁠   Inicio/Pausa+Carga.
5.
14.9 Cancelling the washing
programme
Press
⁠   Inicio/Pausa+Carga.
1.
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
programme.
– If the water level is high, start
the
programme or select a
suitable programme for draining.
→ "Programmes", Page 26
Remove the laundry.
3.
→ "Unloading the laundry",
Page 33
14.10 Cancelling the drying
programme
Turn the programme selector to
set any other programme.
a The door lock opens automatically
after a cooling period of a few
minutes.
14.11 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Requirements
¡ Rinse Stop is activated.
¡ The last rinse cycle of the set pro-
gramme has ended and the laun-
dry is in the rinsing water.
Set the
programme or a pro-
1.
gramme for draining the water.
→ "Programmes", Page 26
Press
⁠   Inicio/Pausa+Carga.
2.
14.12 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
14.13 Switching off the appli-
ance
Turn the programme selector to
1.
⁠ .
Turn off the tap.
2.
Wipe the rubber gasket dry and re-
3.
move any foreign objects.
Leave the appliance door and de-
4.
tergent drawer open so that resid-
ual water can evaporate.

Childproof lock

15 Childproof lock
Secure your appliance against being
Childproof lock
operated unintentionally using the
controls.
15.1 Activating the childproof
lock
Press and hold the two
 and  ⁠   Terminado en/em buttons
for approx. 3 seconds.
a The display shows
a The control elements are locked.
Childproof lock en
⁠   Fácil
⁠ .
33

Advertisement

Table of Contents
loading

Table of Contents