VocoPro DVG-909K Owner's Manual page 30

Setting up preferences cont.
PREFERENCES PAGE
1. TV DISPLAY
TV Display Modes: You can select one of the following TV display modes for the video output:
NORMAL/PS: When the player is connected to a normal (4:3) TV and a wide picture is shown on the full screen, a por-
tion may be cut off automatically.
NORMAL/LB: When the player is connected to a normal TV and a wide picture is shown on the screen, black strips ap-
pear at the top and bottom of the screen.
WIDE: When the player is connected to a wide screen TV. NOTE: If you choose this setting and you don't have a wide
screen TV, the images on the screen may appear distorted due to vertical compression.
2. TV TYPE
Set the DVG-909K's output to match your TV set's system format.
For example, NTSC for North American TV systems or PAL for European systems. Select MULTI. SYSTEM if you fre-
quently switch between PAL and NTSC modes.
3. VIDEO OUTPUT
Choose the video mode based on what video connection you are using.
S-VIDEO: When you are connected to a TV using an S-Video connection.
YCBCR: When you are using a YUV Composite Video connection
YPBPR: When you are connected to a progressive scan TV with Component Y, Pb, Pr cables.
Choose between the three video output modes S-VIDEO, RGB (YCBCR) and PROGRESSIVE SCAN (YPBPR)
PREFERENCES Page
To view the standard
4:3 picture or the cut
standard 4:3 picture
Standard TV set
4:3 subtitle block to 16:9 To view widescreen
view the full width of
picture with a
the widescreen mode widescreen TV set
29
Widescreen TV set