Table of Contents
Advertisement
IN STALLATIO N
After unpacking the fridge check that no parts
are missing. Place the unit in a dry place which is
protected against splashing water. Do not place
directly adjacent to sources of heat such as heating,
gas ovens, hot water, pipes or directly in the sun.
It is important that your appliance is installed and
operated in accordance with these instructions to
ensure its performance, efficiency and operation.
The normal operation of the appliance requires heat
to be radiated away from the condenser located at
the end of the cabinet.
Adequate airflow is required around the compressor
at all times so it is important to keep the grilles clear
of obstructions during use. A minimum of 5-10cm of
clearance around the grilles is recommended.
K EY DIMENSION S ( IN M M)
378mm
424mm
The cooling system has been designed to operate
correctly when the appliance is positioned on angles
up to 30 degrees. It is recommended that the time
the unit is exposed to angles over 30 degrees is
limited to a maximum of four (4) hours continuous
operation.
AIR FLOW
5
30° M A XIM U M
652mm
AIR FLOW
Advertisement
Table of Contents
