Installation - XTM CFR2050XTM Manual

IN STALLATIO N
After unpacking the fridge/freezer check that no
parts are missing. Place the unit in a dry place which
is protected against splashing water. Do not place
directly adjacent to sources of heat such as heating,
gas ovens, hot water, pipes or directly in the sun.
It is important that your appliance is installed and
operated in accordance with these instructions to
ensure its performance, efficiency and operation.
A PP LICAT ION AN D OP ER ATIV E
C OO LING RANGE
The cooling compartment has varying temperature
zones. The values indicated on the digital display are
related to the middle of the cabinet. The Dual Zone
fridge/freezer can be used as either a fridge or a
freezer or both simultaneously. The fridge/freezer
may be used for outdoor use such as for camping
purposes. If you wish to refrigerate medicines,
AIR FLOW FIG. 1
first check to ensure the fridge/freezer's cooling
capacity meets the demands of the respective
medicines. The fridge/freezer is designed to operate
in ambient temperatures between -10° and +55° C in
a maximum air humidity of 90%. The fridge/ freezer
can operate continuously at a maximum angle of
30°. Level operation is preferable.
NOTE: The normal operation of the appliance
requires heat to be radiated away from the
30º
condenser located at the end of the cabinet.
Adequate airflow is required around the compressor
at all times. (Fig. 1).
FIG. 2
The cooling system has been designed to operate
correctly when the appliance is positioned on angles
up to 30 degrees. It is recommended that the time
the unit is exposed to angles over 30 degrees is
limited to a maximum of four (4) hours continuous
operation. (Fig. 2).
5